Chapter 4 Advanced Settings; Band Pricing - Sony SnapLab UP-CR20L Operating Instructions Manual

Advanced Settings

Band Pricing

You can vary the price per print based on the number of
prints ordered. This allows you to offer discounts for large
volume printing.
Prices can be set for each print size. You can also set
additional fees for matte finishing and special prints such
as index or border prints.
The additional fee for special prints is added to the band
price for each print.
Note
If band prices are not configured, the prices configured for
[Normal] will be applied. Items for which [Normal] prices
apply will be displayed with the prices in parenthesis.
Band price setting example
3 × 5" 4 × 6"
1 to 10 $ 0.30 $ 0.30
prints
11 to 50 $ 0.25 $ 0.25
prints
51 prints $ 0.20 $ 0.20
or more
1
Open the Pricing tab on the administration screen.
5 × 7" 6 × 8"
$ 0.40 $ 0.50
$ 0.35 $ 0.45
$ 0.30 $ 0.40
Chapter
2
Touch the [Band] button.
3
Touch the button.
The following screen appears.
4
Under [Band Price], touch the button for the size that
you want to set.
5
Set up the band pricing for the size that you selected.
Lower Qty: This value represents the lower end of the
band to which the Unit Price value will apply. In
the first line, this value is fixed at "1." In the
second and subsequent lines, this value will be
automatically set according to the Upper Qty
setting in the previous line.
Upper Qty: This value represents the upper end of the
band to which the Unit Price value will apply. If no
upper limit is desired for this band, leave this field
blank.
Unit Price: This value represents the price per print
for this band.
To input values in each of the fields, touch the desired
field and then touch the
An example setting is shown below.
4
button.
37
Band Pricing