Connecting To A Computer - Sony SnapLab UP-CR20L Operating Instructions Manual

Connecting to a Computer

To print from a computer, you must connect the unit to the
computer using a commercially available USB cable. Plug
the USB cable into the USB port (device) at the top of the
unit.
When making the connection, you should also consult the
documentation of the computer.
USB cable
Notes
• Before connecting the computer to the unit, make sure
that the unit is turned off or that the Start Guide screen is
displayed. The computer may not be recognized if it is
connected at any other time.
• If the connection is made via a USB hub, correct
operation is not assured.
Computer
73
Printing From a Computer