Loading The Paper Roll And Ink Ribbon; If The Ink Ribbon Breaks During Use - Sony SnapLab UP-CR20L Operating Instructions Manual

4
Remove the paper roll.
5
Remove the paper core from the paper roll.
Note
The paper core is reusable. Do not throw it away.
6
Pull the ribbon door toward you to open it.
7
Remove the ribbon tray.
8
Remove the ink ribbon.
After removing the ink ribbon, attach the black spool
to the white spool.
Do not reuse ink ribbons that have reached their
prescribed print capacities and have been removed.
Note
The ribbon tray is reusable. Do not throw it away.
Loading the Paper Roll and Ink
Ribbon
For details on loading the paper roll and ink ribbon, see
"Loading the Paper Roll and Ink Ribbon" on page 17.
When you are finished loading the paper roll and ink
ribbon, touch the [OK] button in the error message screen.
The error message screen closes, and you can continue
operations.

If the Ink Ribbon Breaks during Use

The remaining ribbon can be used after repairing it with
adhesive tape.
1
Open the ribbon door, and remove the ribbon tray.
Replacing the Paper Roll and Ink Ribbon
27