Front Panel Block (Dc) Assembly - Sony UP-D898DC Service Manual

1-5-3. Front Panel Block (DC) Assembly

t
The following part cannot be reused. Prepare the new part.
. Print media label
1. Remove the rear cover (DC). (Refer to Section 1-5-1.)
2. Remove the top cover (DC). (Refer to Section 1-5-2.)
3. Release the lock arm on the mechanical deck portion (bottom) in the direction of the arrow A, then
open the door block assembly in the direction of the arrow B.
4. Remove the two hooks in the right and left directions of the arrows C, then remove the door panel in
the direction of the arrow D.
n
When replacing the door panel, peel off the UDI label and print media label.
The UDI label is reused. Therefore, peel it off slowly.
Door block assembly
C
Hook
Door panel
UP-D898DC
B
D
Hook
C
Lock arm
A
Door panel
UDI label
Print media label
1-9 (E)