Loading The Paper Roll And Ink Ribbon - Sony UP-DR250 Manual

Securing the USB cable and power cord
To prevent disconnection of the USB cable and power cord
from accidental pulling, be sure to secure the cables with
the cable clamps when connecting them to the printer.
To secure the USB cable
Wrap the cable clamp around the USB cable, and fasten it
securely as shown.
To secure the power cord
Wrap the cable clamp around the power cord, and fasten it
securely as shown.
18

Loading the Paper Roll and Ink Ribbon

Loading the Paper Roll
and Ink Ribbon
This section describes how to load the paper roll and ink
ribbon in the preparation to start printing, after connecting
the computer.
Notes
• When setting the paper roll down, place it vertically as
shown. If you place the paper roll horizontally, the paper
may roll around and fall. This may cause an injury.
• Hold the paper roll with both hands so that you do not
drop it, because it is heavy. Dropping may result in an
injury.
Hold the paper roll with both hands.
Loading the Paper Roll and Ink
Ribbon
When you use the unit for the first time, load the paper roll
and ink ribbon.
Before loading the paper roll and ink ribbon
Confirm that the unit is powered on. If not, turn the power
on.
Otherwise, the automatic paper feeding may not be done
correctly after loading of the paper roll and ink ribbon is
completed.