Power Cabinet Cooling Fan Replacement; Alcl Filter Fan Replacement - ABB ACS800 Series Hardware Manual
+c236 wind turbine convert for asynchronous slip ring generators
Hide thumbs
Also See for ACS800 Series:
- Firmware manual (340 pages) ,
- Hardware manual (210 pages) ,
- Cabinet installation and operating instruction (162 pages)
Table of Contents
Advertisement
98
11. Install and tighten the two M4×12 (T20) screws.
Power cabinet cooling fan replacement
1. Read and repeat the steps in
2. Open the cabinet doors of stator part.
3. Disconnect the fan wiring plug.
4. Remove four screws.
5. Pull the fan out.
6. Check the cleanliness of the cabinet. Clean the interior of the cabinet if necessary
using a soft brush and a vacuum cleaner.
7. Install a new fan in reverse order.
ALCL filter fan replacement
1. Read and repeat the steps in
2. Open the cabinet doors.
3. Disconnect the fan wiring plug (1).
Maintenance
9
10
11
Safety instructions
above.
Safety instructions
above.
- Quick Links:
- Rdcu-12C
- Alcl Filter Module
Hide quick links:
Advertisement
Table of Contents
