Moving The Unit; By Crane; By Fork-Lift Or Pallet Truck - ABB ACS800 Series Hardware Manual
+c236 wind turbine convert for asynchronous slip ring generators
Hide thumbs
Also See for ACS800 Series:
- Firmware manual (340 pages) ,
- Hardware manual (210 pages) ,
- Cabinet installation and operating instruction (162 pages)
Table of Contents
Advertisement
50
Moving the unit
...by crane
...by fork-lift or pallet truck
Mechanical installation
Use the steel lifting lugs attached to the top of
the cabinet. Insert the lifting ropes or slings into
the holes of the lifting lugs.
The lifting lugs can be removed (not mandatory)
once the cabinet is in its final position. If the
lifting lugs are removed, the bolts must be
refastened to retain the degree of protection
of the cabinet.
The centre of gravity may be quite high. Be therefore careful
when transporting the unit. Tilting the cabinets must be
avoided.
The units are to be moved only in the upright position.
If using a pallet truck, check its load capacity before
attempting to move the unit.
- Quick Links:
- Rdcu-12C
- Alcl Filter Module
Hide quick links:
Advertisement
Table of Contents
