About This Manual; Contents Of This Chapter; Compatibility; Safety Instructions - ABB ACS800 Series Hardware Manual

About this manual

Contents of this chapter

This chapter describes the intended audience and contents of the manual. It
contains a flowchart of steps in checking the delivery, installing and commissioning
the converter. The flowchart refers to chapters/sections in this manual and other
manuals.

Compatibility

The manual is compatible with ACS800-67 (+C236) wind turbine converters.

Safety instructions

Follow all safety instructions delivered with the converter.
• Read the complete safety instructions on the first pages of this manual before you
install, commission, or use the converter.
• Read task specific safety instructions before starting the task. See the section
describing the task.

Reader

The reader of the manual is expected to know the standard electrical wiring
practices, electronic components, and electrical schematic symbols.

Contents

The chapters of this manual are briefly described below.
Safety instructions
operation and maintenance of the converter.
Hardware description
Mechanical installation
Planning the electrical installation
the protective functions of the converter, and cable routing.
Electrical installation
Installation checklist
installation of the converter.
Start-up
Maintenance
gives safety instructions for the installation, commissioning,
describes the converter.
instructs how to move, place and mount the converter.
describes the cabling and wiring of the converter.
contains a list for checking the mechanical and electrical
describes the start-up procedure of the converter.
contains preventive maintenance instructions.
provides advice on generator and cable selection,
17
About this manual