Fsk Messages Tab - microHAM micro KEYER 2R Manual

MK2R allows defining nine messages of up to 50 characters each which are stored in non-volatile memory.
Each memory may repeat with a programmable delay (loop) or call another memory (chain).
Commands which may be included in a memory are:
Set PTT:
Clear PTT:
CR & LF:
Figure:
Letter:
Blank:
Letter:
Jump to:
Delay:
Store:
Store All:
Load from File: loads all messages from file
Save to File:
Messages can also be saved and replayed using an external keyboard attached to the PS/2 jack.
See: External Keyboard.
Note: CW and FSK Messages are not saved or loaded with Presets
microHAM © 2006 All rights reserved

FSK MESSAGES TAB

close PTT.
release PTT.
Insert Carriage Return/Line Feed
Insert special Figure character
Insert special Letter character
Insert special Blank character
Insert special Bell character
used for looping a message or calling another message
sets the delay in seconds before looping or calling another message
saves one message to MK2R memory
saves all messages to MK2R memory
saves all messages to file
53