Other:
configurable Accessory connection with dual BCD band data outputs
•
user definable presets to recall all parameters for different control programs or contests
•
all parameters are stored inside the box memory and reloaded after power up
•
integrated chokes and filters for maximum RFI immunity
•
Metal/Aluminum case, powder coated and silk screened
•
Free, no time limit firmware/software upgrades via Internet
•
ALWAYS check the polarity of the 13.8 V power supply.
When changing Radio #1, ALWAYS be sure the proper microphone for the
radio is connected to the MK2R RJ45 MIC jack BEFORE connecting the DB37
If dissimilar radios are attached to MK2R or MK2R+, NEVER connect the
microphone of the Radio #2 to the RJ45 microphone jack on the rear panel.
If your radio supports firmware upload, always perform any upload from
an RS-232 (COM) port on the computer - NOT through MK2R.
microHAM © 2006 All rights reserved
2 - IMPORTANT WARNINGS
RADIO cable.
6