Table of Contents
Advertisement
Type ahead – enables type ahead when using a PS/2 keyboard. Characters are
transmitted after a space (word mode). or when the buffer has reached its limit
(16 characters).
QWERTZ layout – changes keyboard to European QWERTZ layout.
Leading zero as T – sends leading zeros in contest report as T. For example 001
will be send as TT1.
Zero as T – sends all "zeros" in contest report as T. For example number 100 will be
send as 1TT.
One as A – sends all "ones" in contest report as A. For example number 101 will be
send as A0A.
Nine as N – sends all "nines" in contest report as N. For example number 199 will be
send as 1NN.
Report 5NN – send 5NN before contest serial number.
Other message functions can be controlled by an external PS2 keyboard or keypad.
See: External Keyboard.
On this tab you can define nine messages of up to 50 characters each which are stored in MK2R non-
volatile memory. Each memory may have a programmable repeat delay and/or call another memory.
Commands which may be included in a memory are:
Set PTT:
Clear PTT:
Merge:
Set WPM:
Cancel WPM:
Set Key:
Set Wait:
Jump to:
Delay:
Test:
Store:
Store All:
Load from File: loads all messages from file
Save to File:
Messages can also be saved and replayed using an external keyboard or numeric keypad attached to the
PS/2 jack. See: External Keyboard.
microHAM © 2006 All rights reserved
CW from Keyboard
Auto Numbering
CW MESSAGES TAB
close WinKey PTT.
release WinKey PTT.
merge two characters without a letter space – [M]AS will sound AS .-...
force speed to the selected value regardless of position of speed knob.
restore speed set by the Speed pot.
close CW output for selected time in seconds.
wait selected seconds during playback.
used for looping a message or calling another message
sets the delay in seconds before looping or calling another message
plays a message without storing it
saves one message to MK2R memory
saves all messages to MK2R memory
saves all messages to file
52
Advertisement
Table of Contents
