Installing The Ce Guard Kit; Installing The Ce Decals - Toro Greensmaster 3420 TriFlex Operator's Manual

10

Installing the CE Guard Kit

Parts needed for this procedure:
1 CE Guard Kit―Part No. 04443 (sold separately)
Procedure
Install the CE guard kit; refer to the CE Guard Kit for
Greensmaster 3420 TriFlex Traction Unit Installation
Instructions.
11

Installing the CE Decals

Parts needed for this procedure:
1 Warning decal (Part No. 136-8505)
1 CE mark decal
1 Production year decal
Procedure
If you use this machine in a country that complies to
CE standards, perform the following steps after you
install the guard kit to the machine:
•
Apply the CE warning decal (Part No. 136-8505)
over the existing warning decal (Part No.
136-8506).
•
Apply the CE mark decal to the frame under the
front of the seat (Figure 10).
1. CE mark decal
•
Install the production year decal near the serial
plate (Figure 11).
1. Production year decal
16
Figure 10
Figure 11
g233420
g271539