Specifications; Attachments/Accessories; Before Operation; Before Operation Safety - Toro Greensmaster 3420 TriFlex Operator's Manual

Specifications

Note:
Specifications and design are subject to
change without notice.
Width of cut
Wheel tread
Wheel base
Overall length (with baskets)
Overall width
Overall height
Net weight with reels
(11–blade)

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Exmark.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
151 cm (59.5 inches)
128 cm (50.5 inches)
123 cm (48.6 inches)
249 cm (98.0 inches)
179 cm (70.6 inches)
205 cm (80.8 inches)
Refer to the traction unit
serial tag (Figure 1).
24
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.

Before Operation

Before Operation Safety

General Safety
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Always shut off the engine, remove the key (if
equipped), wait for all moving parts to stop,
and allow the machine to cool before adjusting,
repairing, cleaning, or storing the machine. Know
how to stop the machine and shut off the engine
quickly.
•
Check that operator-presence controls, safety
switches, and shields are attached and functioning
properly. Do not operate the machine unless they
are functioning properly.
•
Before mowing, always inspect the machine to
ensure that the cutting units are in good working
condition.
•
Inspect the area where you will use the machine
and remove all objects that the machine could
throw.
Fuel Safety
•
Use extreme care in handling fuel. It is flammable
and its vapors are explosive.
•
Extinguish all cigarettes, cigars, pipes, and other
sources of ignition.
•
Use only an approved fuel container.
•
Do not remove the fuel cap or fill the fuel tank
while the engine is running or hot.
•
Do not add or drain fuel in an enclosed space.
•
Do not store the machine or fuel container where
there is an open flame, spark, or pilot light, such
as on a water heater or other appliance.
•
If you spill fuel, do not attempt to start the engine;
avoid creating any source of ignition until the fuel
vapors have dissipated.