Toro Greensmaster 3420 TriFlex Operator's Manual page 18

Figure 13
1. Traction pedal—forward
2. Taction pedal—reverse
Figure 14
Ground speeds are as follows:
•
3.2 to 8 km/h (2 to 5 mph) forward mowing speed
•
16 km/h (10 mph) maximum transport speed
•
4.0 km/h (2.5 mph) reverse speed
Steering-Arm-Locking Pedal
Press the pedal (Figure
steering arm for operator comfort, then, release the
pedal to lock the arm in place.
3. Steering-arm-locking
pedal
13) and raise or lower the
Throttle Lever
The throttle lever
speed of the engine. Move the throttle lever toward
the F position to increase the engine speed; move
AST
it toward the S
LOW
speed.
Note:
You cannot shut off the engine using the
throttle lever.
g014603
1. Ignition switch
2. Functional-control lever
3. Raise/Lower mow control
Raise/Lower Mow Control
Moving the control
g005105
operation lowers the cutting units and starts the reels.
Pull back on the control to stop the reels and raise
the cutting units. To stop the reels without raising the
cutting units, pull back on the control momentarily
and releasing it. Start the reels by moving the control
forward.
Functional Control Lever
The functional control lever
traction selections plus a N
shift from mow to transport or transport to mow (not
to neutral) while the machine is in motion; no damage
will result.
•
R position—neutral position; use when
EAR
backlapping the reels
•
M position—use when cutting grass
IDDLE
•
F position—use when driving the machine
RONT
between job sites
18
(Figure 15) allows you to control the
position to decrease the engine
Figure 15
4. Throttle lever
5. InfoCenter
(Figure 15) forward during cutting
(Figure 15) provides 2
position. You can
EUTRAL
g033079