2
Installing the Seat
Parts needed for this procedure:
1
Seat-completion kit
Procedure
Acquire your desired seat kit from your distributor and
install it to the machine; refer to the kit Installation
Instructions.
3
Installing the Steering
Wheel
Parts needed for this procedure:
1
Steering wheel
1
Locknut (1-1/2 inches)
1
Washer
1
Steering-wheel cap
Procedure
1.
Slide the steering wheel onto the steering shaft
(Figure
4).
1. Steering wheel
2. Washer
2.
Slide the washer onto the steering shaft
4).
3.
Secure the steering wheel to the shaft with a
locknut and tighten it to 27 to 35 N∙m (20 to 26
ft-lb)
(Figure
4).
4.
Install the cap to the steering wheel and secure
it with 6 bolts
12
Figure 4
3. Locknut
4. Cap
(Figure
4).
g010834
(Figure