Safety; General Safety - Toro Greensmaster 3420 TriFlex Operator's Manual

Inspecting the Fuel Lines and
Connections.................................................. 40
Electrical System Maintenance ........................... 40
Electrical System Safety ................................... 40
Servicing the Battery......................................... 40
Locating the Fuses ........................................... 41
Jump-Starting the Machine............................... 42
Drive System Maintenance .................................. 42
Checking the Tire Pressure............................... 42
Checking the Torque of the Wheel
Nuts .............................................................. 42
Adjusting the Transmission for Neutral.............. 42
Adjusting the Transport Speed.......................... 43
Adjusting the Mowing Speed ............................ 44
Cooling System Maintenance .............................. 44
Cooling System Safety ..................................... 44
Cleaning the Radiator Screen ........................... 44
Checking the Engine-Coolant Level.................. 45
Brake Maintenance ............................................. 45
Burnishing the Brakes....................................... 45
Adjusting the Brakes......................................... 45
Belt Maintenance ................................................ 46
Adjusting the Alternator Belt ............................. 46
Hydraulic System Maintenance ........................... 46
Hydraulic System Safety................................... 46
Servicing the Hydraulic Fluid ............................ 46
Checking the Hydraulic Lines and
Hoses............................................................ 48
Cutting Unit Maintenance ..................................... 49
Blade Safety ..................................................... 49
Installing and Removing the Cutting
Units.............................................................. 49
Checking the Reel-to-Bedknife Contact ............ 52
Backlapping the Reels ...................................... 52
Storage ................................................................... 53

Safety

This machine has been designed in accordance with
EN ISO 5395 and ANSI B71.4-2017 and meets these
standards when you complete the setup procedures.

General Safety

This product is capable of amputating hands and feet
and of throwing objects.
Using this product for purposes other than its intended
use could prove dangerous to you and bystanders.
•
Read and understand the contents of this
Operator's Manual before starting the engine.
•
Use your full attention while operating the
machine. Do not engage in any activity that
causes distractions; otherwise, injury or property
damage may occur.
•
Do not put your hands or feet near moving
components of the machine.
•
Do not operate the machine without all guards
and other safety protective devices in place and
working on the machine.
•
Keep clear of any discharge opening.
•
Keep children, bystanders, and pets out of the
operating area. Never allow children to operate
the machine.
•
Always shut off the engine, remove the key (if
equipped), wait for all moving parts to stop,
and allow the machine to cool before adjusting,
repairing, cleaning, or storing the machine.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always
pay attention to the safety-alert symbol
means Caution, Warning, or Danger-personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
4
, which