Toro Greensmaster 3420 TriFlex Operator's Manual page 20

•
C T
OOLANT EMPERATURE
coolant temperature in either °C or °F.
•
F C
UNCTIONAL ONTROL
indicated by a rabbit and mow mode is indicated
by a turtle.
•
E O P
NGINE IL RESSURE
the engine oil pressure drops below a safe level.
•
M A /B
ENU CCESS ACK
access the InfoCenter menus. You can use it to
back out of any menu you are currently using.
•
D button—use this button to scroll down
OWN
menus.
•
R button—use this button to open a menu
IGHT
where a right arrow indicates additional content.
Note:
The purpose of each button may change
depending on what is required at the time. Each
button is labeled with an icon displaying its current
function.
Using the Menus
To access the InfoCenter-menu system, press the
M A button while at the main screen. This
ENU CCESS
brings you to the M
AIN
tables for a synopsis of the options available from
the menus:
M M
AIN ENU
Menu Item
F
AULTS
S
ERVICE
D
IAGNOSTICS
S
ETTINGS
A
BOUT
—indicates the engine
S —transport mode is
TATUS
light—this icon appears if
button—press this button to
M . Refer to the following
ENU
Description
The F menu contains
AULTS
a list of the recent machine
faults. Refer to the Service
Manual or your authorized
Toro distributor for more
information on the F
AULTS
menu and the information
contained there.
The S menu contains
ERVICE
information on the machine
such as hours of use and other
similar numbers.
The D menu
IAGNOSTICS
lists various states that the
machine currently has. You
can use this to troubleshoot
certain issues as it quickly tells
you which machine controls
are on and which are off.
The S menu allows
ETTINGS
you to customize and modify
configuration variables on the
InfoCenter display.
The A menu lists the
BOUT
model number, serial number,
and software version of your
machine.
S
ERVICE
Menu Item
H
OURS
C
OUNTS
B
ACKLAP
D
IAGNOSTICS
Menu Item
E R
NGINE UN
G
LOWPLUGS
F
AN
S1–S4
R E
EELS NABLE
S
ETTINGS
Menu Item
U
NITS
L
ANGUAGE
LCD B
ACKLIGHT
LCD C
ONTRAST
P M
ROTECTED ENUS
P S
ROTECT ETTINGS
R D
ESET EFAULTS
R D
AISE ELAY
20
Description
Lists the total number of hours
that the machine, engine,
reels, backlap, and fan have
been on, as well as the
number of hours the machine
has been transported and
overheated.
Lists the number of preheats
and starts the machine has
experienced.
Turns backlapping O /O
N FF
(once ON you can turn
backlapping Off with this
setting or by turning off the
ignition key).
Description
Indicates if the following items
are active: Key start, key run,
joystick lower, joystick raise,
neutral, seat or parking brake,
OK run, and RTR or ETR.
Indicates if the following items
are active: Key start, timeout
limited, and glowplugs.
Indicates if the fan is active
in the following instances:
Engine high temp, oil high
temp, engine or hydraulic high
temp, and fan on.
Controls the raising and
lowering of the solenoids.
Indicates if the eReel is
enabled.
Description
Controls the units used on the
InfoCenter. The menu choices
are English or Metric.
Controls the language used
on the InfoCenter.
Controls the brightness of the
LCD display.
Controls the contrast of the
LCD display.
Allows the distributor/engineer
to access protected menus by
inputting a passcode.
Controls the protected menus.
Resets the InfoCenter to
default settings.
Controls the raise delay time
for the center cutting unit.