Setup - Toro Greensmaster 3420 TriFlex Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
4
5
6
7
8
9
10
11
12
13
Description
Roll bar
Bolt (1/2 x 3-3/4 inches)
Flange nut (1/2 inch)
Seat-completion kit
Steering wheel
Locknut (1-1/2 inches)
Washer
Steering-wheel cap
No parts required
Oil Cooler Kit—Greensmaster 3300
Series Traction Unit (Part No. 119-1691
[purchased separately])
Grass-basket hook
Flange bolts
Gauge bar
Cutting unit (obtain from your authorized
Toro distributor)
Grass basket
Electric-reel-motor counterweight
Capscrew
O-ring
No parts required
Weight Kit, Part No. 121-6665
(purchase separately) Note: This kit is
not required for units with the 3 wheel
drive kit installed.
CE Guard Kit―Part No. 04443 (sold
separately)
Warning decal (Part No. 136-8505)
CE mark decal
Production year decal
No parts required
No parts required
Qty.
1
4 Install the roll bar.
4
1 Install the seat to the base.
1
1
Install the steering wheel.
1
1
–
Activate and charge the battery.
–
Install the optional oil cooler.
6
Install the grass-basket hooks.
12
1
3
Install the cutting units and counter
3
weights.
3
6
3
–
Set the clip-control feature.
1 Add rear weight.
1 Install the CE guard kit.
1
1 Install the CE decals (if required).
1
–
Reduce the tire pressure.
–
Burnish the brakes.
10
Use