Toro Greensmaster 3420 TriFlex Operator's Manual page 8

Replaces Decal 136-8506 for CE Machines
Note:
This machine complies with the industry standard
stability test in the static lateral and longitudinal tests with the
maximum recommended slope indicated on the decal. Review the
instructions for operating the machine on slopes in the Operator's
Manual as well as the conditions in which you would operate the
machine to determine whether you can operate the machine in the
conditions on that day and at that site. Changes in the terrain can
result in a change in slope operation for the machine. If possible,
keep the cutting units lowered to the ground while operating the
machine on slopes. Raising the cutting units while operating on
slopes can cause the machine to become unstable.
1. Warning—read the
Operator's Manual;
receive training before
operating the machine.
2. Warning—hearing
protection must be worn.
3. Cutting/dismemberment
hazard of hand or foot,
mower blade—stay away
from moving parts; keep
all guards and shields in
place.
136-8505
4. Tipping hazard—do not
drive across or down
slopes greater than 15
degrees.
5. Thrown object
hazard—keep bystanders
a safe distance away from
the machine.
6. Warning—engage the
parking brake, shut off the
engine, and remove the
ignition key before leaving
the machine.
133-8062
1. Engine coolant under
pressure.
2. Explosion hazard—read
the Operator's Manual.
decal136-8505
decal133-8062
8
106-6755
3. Warning—do not touch the
hot surface.
4. Warning—read the
Operator's Manual.
decal106-6755