Terms - Mitsubishi Electric MELSEC-Q Series User Manual

Melsec-q/l anywireaslink master module
Hide thumbs Also See for MELSEC-Q Series:
Table of Contents

Advertisement

Unless otherwise specified, this manual uses the following terms.
Term
Address
Address writer
AnyWireASLINK
AnyWireASLINK bridge module
AnyWireASLINK master module
ASLINKAMP
ASLINKER
Buffer memory
CPU module
GX Developer
GX Works2
Head module
ID
Intelligent function module
Master module
MELSEC-L series
MELSEC-Q series
Power cable (24V, 0V)
Programming tool
Slave module
Terminating unit
Transmission cable (DP, DN)
Transmission cycle time
18

TERMS

A parameter assigned to a slave module to identify each node on the AnyWireASLINK network
A hand-held device to read/write parameters (including addresses) from/to a slave module
A system where sensors at the end of a control system are connected to a programmable controller in the most
suitable way.
With this system, a bridge module can detect sensor disconnection and a user can set the I/O operations of a slave
module on a bridge module without using I/O areas of the CPU module.
A generic term for the NZ2AW1C2AL and NZ2AW1GFAL
A generic term for the RJ51AW12AL, QJ51AW12AL, and LJ51AW12AL
A generic term for sensor amplifiers that have an AnyWireASLINK interface
A generic term for I/O devices that have an AnyWireASLINK interface
A memory in an intelligent function module, where data (such as setting values and monitoring values) exchanged
with a CPU module are stored
A generic term for the MELSEC-Q and -L series CPU modules
The product name of the software package for the MELSEC programmable controllers
The abbreviation for the LJ72GF15-T2 CC-Link IE Field Network head module
A parameter to identify whether the module is an input module or output module based on its address
Output slave module ID: Address
Input slave module/I/O combined slave module ID: Address + 200
A MELSEC-Q/L series module that has functions other than input and output, such as an A/D converter module and
D/A converter module
A generic term for the QJ51AW12AL and LJ51AW12AL
The abbreviation for the Mitsubishi programmable controller MELSEC-L series
The abbreviation for the Mitsubishi programmable controller MELSEC-Q series
A cable that connects a master module to a 24VDC external power supply
A generic term for GX Works2 and GX Developer
A generic term for modules that communicate data with a master module
A waveform shaper
A signal cable that connects a slave module to a master module
A data sampling interval
Description
H

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Qj51aw12alMelsec-l seriesLj51aw12al

Table of Contents