System Using The Qj51Aw12Al; When Using A Module In The Ordinary System Configuration - Mitsubishi Electric MELSEC-Q Series User Manual

9.2

System Using the QJ51AW12AL

9.2.1

When using a module in the ordinary system configuration

This section provides a program example with the following system configuration and conditions.
(1) System configuration
(2) Programming conditions
The input signals of the input ASLINKER, stored in Input information area (Un\G0 to Un\G15) of the master
module, are batch-transferred to the device data of the CPU module.
Moreover, the device data of the CPU module is batch-transferred to Output information area (Un\G4096 to
Un\G4111) of the master module, and the output signals of the output ASLINKER are transmitted.
(3) QJ51AW12AL operation setting
Set the number of transmission points.
Project window  [Intelligent Function Module]  QJ51AW12AL  [Switch Setting]
76
QCPU
QJ51AW12AL (X/Y00 to X/Y1F)
Output ASLINKER
(address: 0)
Input ASLINKER
(address: 0)
AnyWireASLINK terminating unit
LED1
LED2
Sensor switch 1
Sensor switch 2