Removing The Additional Tray Lift Motor - Canon Inner Finisher-A1 Service Manual

4
Parts Replacement and Cleaning Procedure > Removing the Motors > Removing the Additional Tray Lift Motor

Removing the Additional Tray Lift Motor

1) Remove the additional tray.
2) Remove two screws and then the top cover of the tray.
3) Disconnect one connector.
x2 x1
6) Remove four screws, one earth cable, one washer, and one plate.
x4
4 Parts Replacement and Cleaning Procedure > Removing the Motors > Removing the Additional Tray Lift Motor
4) Turn over the tray.
5) Remove two screws and then the bottom cover of the tray.
F-4-74 F-4-74
7) Remove one screw and then the harness guide.
x1
F-4-76 F-4-76
x2
F-4-75 F-4-75
4-26
F-4-77 F-4-77
4-26