Canon Inner Finisher-A1 Service Manual page 48

4
Parts Replacement and Cleaning Procedure > Removing the Motors > Removing the Tray Lift Motor
4) Remove two screws and then the top cover of the tray.
5) Disconnect one connector.
x2 x1
8) Remove three screws, one earth cable, one washer, one spring, and one plate.
x3
4 Parts Replacement and Cleaning Procedure > Removing the Motors > Removing the Tray Lift Motor
6) Turn over the tray.
7) Remove two screws and then the bottom cover of the tray.
F-4-81 F-4-81
9) Remove one screw and then the harness guide.
x1
F-4-83 F-4-83
x2
F-4-82 F-4-82
4-28
F-4-84 F-4-84
4-28