4
Parts Replacement and Cleaning Procedure > Removing the Solenoid > Removing the Paper Lever Drive Solenoid
Removing the Solenoid
Removing the Paper Lever Drive Solenoid
1) Remove the upper unit.
"Removing the Upper Unit"(page 4-4).
2) Move the stapler rearward.
6) Remove the additional tray(only when the additional tray is installed).
7) Remove the tray.
4
Parts Replacement and Cleaning Procedure > Removing the Solenoid > Removing the Paper Lever Drive Solenoid
3) Remove the reuse band of the additional tray harness (only when the additional tray is
installed).
4) Remove the reuse and of the tray harness.
5) Remove two screws.
F-4-28
F-4-28
8) Move the gripper unit in the direction of the arrow.
F-4-30
F-4-30
x2
x1
4-13
F-4-29
F-4-29
F-4-31
F-4-31
4-13