Canon Inner Finisher-A1 Service Manual page 36

4
Parts Replacement and Cleaning Procedure > Removing the Solenoid > Removing the Staple Solenoid
9) Remove three screws and then the grate-shaped guide (lower).
x3
12) Remove three screws and then the processing tray.
x3
4 Parts Replacement and Cleaning Procedure > Removing the Solenoid > Removing the Staple Solenoid
10) Remove two wire saddles.
11) Disconnect the relay connector and one screw.
x2
F-4-40 F-4-40
13) Remove the harness from the harness guide.
14) Remove one screw and then the paper lever unit.
F-4-42 F-4-42
x1
x1
4-16
F-4-41 F-4-41
x1 x1
F-4-43 F-4-43
4-16