Installation Procedure; Preparation To Install In The Host Machine - Canon Inner Finisher-A1 Service Manual

Installation Procedure

Preparation to install in the host machine

1) Remove the 6 screws to detach the upper guide.
(Stepped screw x 2, Binding screw x 4)
Stepped screw
3) Hold the standard tray by hand and insert a screwdriver in the tray bottom hole for releasing the ratchet gear to have the tray down.
6
Installation(Addtional Tray-A1) > Installation Procedure > Preparation to install in the host machine
2) Remove the screw to free the safety switch sensor unit.
x6
F-6-3 F-6-3
6 Installation(Addtional Tray-A1) > Installation Procedure > Preparation to install in the host machine
x1
F-6-5 F-6-5
F-6-4 F-6-4
6-5
6-5