6) Wire the harness along the harness guide part [A] of the rear cover and fix the reuse band.
Then fix the grounding wire together with the one of the standard tray harness.
7) Set the harness in the 6 harness guides.
x6
6
Installation(Addtional Tray-A1) > Installation Procedure > Connecting to Connected Equipment
[A]
8) Joint the 2 connectors to the driver PCB and set the harness in the
F-6-13
F-6-13
6
Installation(Addtional Tray-A1) > Installation Procedure > Connecting to Connected Equipment
2 harness guides.
x2
x2
F-6-12
F-6-12
F-6-14
F-6-14
6-8
6-8