Canon Inner Finisher-A1 Service Manual page 65

5
Installation(Inner Finisher-A1) > Installation Procedure > Installation Procedure
8) Remove 2 screws to detach the front silver cover.
(Left:TP screw, Right:RS-tight screw)
x2
10) Release the fittings to remove the left silver cover from tray lower cover.
MEMO:
Slide the cover to the front side to release the fittings, and then lift it up.
5 Installation(Inner Finisher-A1) > Installation Procedure > Installation Procedure
9) Detach the combined delivery tray of the host machine and its lower cover. The lower cover is no longer reused.
MEMO:
It is good idea to place the paper in the host machine after removing the delivery tray to avoid screws
falling in the host machine.
F-5-12 F-5-12
11) Fit the left silver cover removed at Step 10 to the supplied tray
lower cover.
F-5-14 F-5-14
5-7
F-5-13 F-5-13
F-5-15 F-5-15
5-7