HP 3PAR StoreServ 7000 Service Manual page 47

30. Press ENTER to accept the default port number or type the port number of the http proxy system
and press ENTER.
What port number should be used on the http proxy system? [default]:
[XXXX]
31. Type no to not require proxy authentication and press ENTER. If you answered no, skip to
step 34.
Type yes to require proxy authentication, press ENTER and continue with step 32.
Will proxy authentication (id/password) be used? (yes or no) [no]:
yes
32. Type the proxy User ID and press ENTER.
Please enter the proxy user id:
alphanumeric value
33. Type the proxy password for User ID (alphanumeric value) and press ENTER. Retype the
password and press ENTER to confirm.
Please enter the password for id 'alphanumeric value': alphanumeric value
Please re-enter (confirm) the password: alphanumeric value
34. Type yes to confirm that the data is correct and press ENTER.
3PAR Secure Service Policy Manager
- Name/address:
- Port:
- Proxy:
- Proxy name/address: XX.XXX.XXX.XXX
- Proxy port:
- Proxy id:
Is this data correct? (yes or no)? [yes]
yes
35. Type the external NTP system address (if applicable) or none and press ENTER.
SP Network Parameters
Enter Control-C at any time to abort this process
Enter the IP address of an external NTP system
<NTP.system.address>
36. Press ENTER or type yes to configure the SP firewall in permissive mode.
SP Network Parameters
Enter Control-C at any time to abort this process
The SP firewall protects the SP and the customer network from unauthorized use.
It can be configured in permissive mode to allow any host to connect to the SP
<static.IP.address>
[default] or [XXXX]
http
[default] or [XXXX]
[alphanumeric value]
Manually Setting up the Service Processor 47