Table of Contents
Advertisement
2. Use the xbinst utility included with the SDx Environments installation to prepare board
installation files, and program the configuration memory using the Vivado
Manager.
3. Install device drivers on the host computer. See the SDx Environments Release Notes,
Installation, and Licensing Guide (UG1238)
installation and setup process.
When using the xbinst utility with a platform directory structure containing a DSA not
Note:
included with the SDx Environments installation, such as one built from the reference design, the -f
switch must be used to specify the location of the XPFM(.xpfm) file for that platform.
To determine the present operational status of the platform in more detail, including the
HAL driver version, PCIe IDs, global memory details, FPGA temperature and voltage,
compute unit status, and more, use the xbsak utility included with the directory that is
created by running the xbinst utility as described above.
The PCIe IDs (Vendor, Device, SDevice (Subsystem)) must match those indicated in
Note:
Connectivity in Chapter 3
> ./xbinst/runtime/bin/xbsak query
INFO: Found 1 device(s)
DSA name:
HAL ver:
Vendor:
Device:
Device ver:
SDevice:
SVendor:
DDR size:
DDR count:
Data alignment: 64
DDR free size:
Min xfer size:
OnChip Temp:
VCC INT:
VCC AUX:
VCC BRAM:
OCL Frequency:
0:
1:
PCIe:
DMA threads:
MIG Calibrated: true
Firewall Last Error Status:
0:
1:
2:
CU Status:
0:
1:
2:
3:
INFO: xbsak query successful.
Kintex UltraScale KCU1500 Acceleration Development Board
UG1234 (v2017.1) June 20, 2017
for compatibility with the kernel mode drivers.
xilinx:kcu1500:4ddr-xpr:4.0
0.0
10ee
4b27
64
4340
10ee
0x1000000 KB
4
0x1000000 KB
64
53 C
930 mV
1783 mV
931 mV
300 MHz
500 MHz
GEN3 x 8
4
0x0 (GOOD)
0x0 (GOOD)
0x0 (GOOD)
0x4 (IDLE)
0x4 (IDLE)
0x4 (IDLE)
0x4 (IDLE)
www.xilinx.com
Chapter 6: Install, Bring-Up, and Use
[Ref 1]
for detailed instructions on the
®
Hardware
Host
45
Send Feedback
Advertisement
Table of Contents
