®
ABB i-bus
EIB / KNX
4
Planning
and application
4.1
Description of the
threshold value function
40
Planning and application
How does the threshold value function?
10,00
9,00
8,00
7,00
Threshold value 1: Upper limit
6,00
5,00
Threshold value 1: Lower limit
4,00
3,00
2,00
1,00
0,00
Threshold value object
-1,00
0,00
10,00
20,00
Fig. 27: Threshold value function
In the example diagram above, it can be seen that the measured value
begins with a zero value and the communication object for the threshold
value 1 has the value „0". This value can be cyclically sent onto the bus
if the relevant parameter in the application program is set.
As long as the measured value does not exceed the upper limit of the thres-
hold value 1, the communication object threshold value 1 will remain „0".
As soon as the measured value exceeds the upper limit of the threshold
value 1, the communication object threshold will change value to „1".
The communication object threshold value 1 will remain „1", until the
measured value once again falls below the lower limit of the threshold value 1.
30,00
40,00
50,00
60,00
70,00
80,00
90,00
100,00