Calculation 1; Calculation 2, 3 And 4 - ABB AE/S 4.2 Product Manual

®
ABB i-bus EIB / KNX
3.3.3

Calculation 1

3.3.4 Calculation 2, 3 und 4
38
Commissioning
Fig. 25: Communication object "Calculation 1"
No.. Function
36 Send output value
This communication object is used to send the result of calculation 1.
Depending on the calculation type selected, the result is sent as
1-bit value [0/1]
1-byte value [0...+ 255]
1-byte value [– 128...+ 127]
2-byte value [0...+ 65,535]
2-byte value [– 32,768...+ 32,767]
2-byte value [EIB floating point]
4-byte value [IEE floating point]
In order to guarantee full interoperability with other EIB slaves, only a data type
should be selected for the output which is permissible for the calculated physical
size in compliance with KONNEX! (Refer to KNX manual chapter 3/7/2).
Table 7: Communication object 36 "Calculation 1"
No. Function
37 See communication
object 36
38 See communication
object 36
39 See communication
object 36
Table 8: Communication objects 37 to 39 – "Calculation 2, 3 and 4"
Object name Data type
Calculation 1 EIS variable
DPT variable
EIS 1 DPT 1.001
EIS 6 DPT 5.001
EIS 14 DPT 6.010
EIS 10 DPT 8.001
EIS 10 DPT 7.001
EIS 5 DPT 9.001
EIS 9 DPT 14.000
Object name Data type
Calculation 2
Calculation 3
Calculation 4
Flags
C, R, T
Flags