ABB AE/S 4.2 Product Manual page 35

®
ABB i-bus EIB / KNX
Commissioning
Send output value
Options: after a change
after a change and cyclically
This parameter is used to define how the Output value should be sent.
Option After a change = Send output value after a change
Option After a change and cyclically = Send output value after a change and
cyclically
A further parameter appears in the case of these options.
Output value is sent, every
Options: 5 s/10 s/30 s/1 min/5 min/1 min/30 min/1 h/6 h/12 h/24 h
This additional parameter is used to set the interval for cyclical sending.
33