Mitsubishi Electric MELSEC iQ-R Series User Manual page 65

Setting items
Item Description
Device Assignment Right-click in the setting window and select a link device assignment method
Method from the "Device Assignment Method" menu.
• Start/End: Enter the start and end numbers of link devices.
• Points/Start: Enter the points and start numbers of link devices.

Link Side Set the link refresh ranges of SB and SW. One range can be set for each SB
and SW. ( Page 27 Link refresh)
Ex.
CPU Side
0000H
Device
·
name
(SB)
01FFH
0000H
Device
·
name
(SW)
01FFH
Master/local module
Setting range
• Start/End
• Points/Start
(Default: Start/End)
Device Name
• SB
• SW
Points
• SB: 16 to 512 (Set it in increments of 16 points.)
• SW: 1 to 512
(Default: Blank (512 points when the refresh
target is the module label))
Start
• SB: 00000H to 001F0H (Set a multiple of 16
0000H
Device
including 0.)
·
name
• SW: 00000H to 001FFH
(SB)
01FFH
(Default: Blank (fixed to 0 when the refresh target
is the module label))
0000H
Device
·
End
name
(SW)
• SB: 0000FH to 001FFH (Set a multiple of 16 -
01FFH
1.)
• SW: 00000H to 001FFH
(Default: Blank (fixed to 1FFH when the refresh
target is the module label))
Target
• Module Label
CPU module
• Specify Device
(Default: Module Label)
Device Name
• Module Label: 
• Specify Device (when link side is fixed to SB):
SB, M, L, B, D, W, R, ZR, RD (only SB, W, and
RD for remote head module)
• Specify Device (when link side is fixed to SW):
SW, M, L, B, D, W, R, ZR, RD (only SW, W, and
RD for remote head module)
(Default: Blank (cannot be set when the refresh
target is the module label))
Points, Start, End
• Range of the device in the CPU module
(Default: Blank (cannot be set when the refresh
target is the module label))
2 PARAMETER SETTINGS
2.3 Basic Settings
2
63