Example Of Communications Between A Master Station And A Local Station; System Configuration Example - Mitsubishi Electric MELSEC iQ-R Series User Manual

3.2
Example of Communications Between a Master
Station and a Local Station
This section describes communications between the master station and local station.

System configuration example

The following system configuration is used to explain communication between the master station and local station.
System configuration
The same system is used for the master station and local station.
Module name
R04CPU
Start I/O number
Terminating resistor
Master station
(remote net Ver.1 mode)
RJ61BT11 RX10 RY10R2
X/Y00 to X/Y1F X20 to X2F Y30 to Y3F
Number of occupied stations: 1

3.2 Example of Communications Between a Master Station and a Local Station

Local station (station No.1)
(remote net Ver.1 mode)
Terminating resistor
3 PROGRAMMING
73
3