Materials; Tightening Torques For Power Connections; Applicable Standards - ABB ACS800-07-0610-3 Hardware Manual

Materials

Cabinet
Busbars
Fire safety of materials
(IEC 60332-1)
Packaging
Disposal

Tightening torques for power connections

Screw size Torque

Applicable standards

• EN 50178 (1997)
• EN 60204-1 (1997)
• EN 60529: 1991 (IEC 529)
• IEC 60664-1 (1992)
• EN 61800-3 (1996) +
Amendment A11 (2000)
• UL 508C
• CSA C22.2 No. 14-95
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Hot-dip zinc-coated (thickness approx. 20 µm) steel sheet (thickness 1.5 mm) with
polyester thermosetting powder coating (thickness approx. 80 µm) on visible surfaces
except back panel. Colour: RAL 7035 (light beige, semigloss).
Tin- or silver-plated copper
Insulating materials and non-metallic items: Mostly self-extinctive
Frame: Wood or plywood. Plastic wrapping: PE-LD. Bands: PP or steel.
The drive contains raw materials that should be recycled to preserve energy and natural
resources. The package materials are environmentally compatible and recyclable. All
metal parts can be recycled. The plastic parts can either be recycled or burned under
controlled circumstances, according to local regulations. Most recyclable parts are marked
with recycling marks.
If recycling is not feasible, all parts excluding electrolytic capacitors and printed circuit
boards can be landfilled. The DC capacitors (C1-1 to C1-x) contain electrolyte and the
printed circuit boards contain lead, both of which are classified as hazardous waste within
the EU. They must be removed and handled according to local regulations.
For further information on environmental aspects and more detailed recycling instructions,
please contact your local ABB distributor.
M5 3.5 Nm (2.6 lbf.ft)
M6 9 Nm (6.6 lbf.ft)
M8 20 Nm (14.8 lbf.ft)
M10 40 Nm (29.5 lbf.ft)
M12 70 Nm (52 lbf.ft)
M16 180 Nm (133 lbf.ft)
The drive complies with the following standards. The compliance with the European Low
Voltage Directive is verified according to standards EN 50178 and EN 60204-1.
Electronic equipment for use in power installations.
Safety of machinery. Electrical equipment of machines. Part 1: General requirements.
Provisions for compliance: The final assembler of the machine is responsible for installing
- an emergency-stop device
- a supply disconnecting device.
Degrees of protection provided by enclosures (IP code).
Insulation coordination for equipment within low-voltage systems. Part 1: Principles,
requirements and tests.
EMC product standard including specific test methods
UL Standard for Safety, Power Conversion Equipment, second edition
Industrial control equipment
127
Technical data