Notes On Firmware Update - Fujitsu M10 Product Notes

However, this problem does not affect system operation.
(3) Firefox
If you use XSCF Web in a Firefox environment, the browser may prompt you to
■
save the login ID and password when you log in to the XSCF. In this case, do not
save the login ID and password. If you save the login ID and password, the saved
data may be displayed on LDAP, SMTP, and REMCS web pages.
Note - Remote Customer Support System (REMCS) is supported only for SPARC M10
systems sold within Japan by Fujitsu.
Configure either of the following settings to disable the login ID/password save
function of the browser:
- Disable the login ID/password save function throughout the browser. Select
[Tools] - [Options] - [Security] tab, and uncheck [Remember passwords for sites]
in [Passwords].
- Specify the site as an exception to login ID and password saving. Select [Tools] -
[Options] - [Security] tab, and check [Remember passwords for sites] in
[Passwords]. Then, click the [Never Remember Password for This Site] button in
the dialog box that appears for ID and password saving when you log in to the
XSCF. This registers the address of the XSCF in the [Exceptions] list for ID and
password saving, and the dialog box for ID and password saving does not
appear at subsequent logins to the XSCF.
Restrictions
(1) Common to browsers
There are no restrictions known at present.
(2) Internet Explorer
If you use Internet Explorer 8 in a Windows 7 environment, built-in Administrator
accounts cannot be used.
(3) Firefox
There are no restrictions known at present.

Notes on firmware update

[SPARC M10-4S]
■
If you update the firmware by executing the flashupdate(8) command or using
XSCF Web, the time for the processing depends on the number of SPARC M10-4S
chassis or crossbar boxes that configure the system.
The relationship of the master XSCF and the standby XSCF after the update of the
■
XSCF firmware depends on the version of the updated XCP.
The following table shows the relationship between the master XSCF and the
standby XSCF as well as the operation of firmware update, for each XCP version.
Chapter 2 XCP 2240-Related Information 19