Fujitsu M10 Product Notes page 156

Table 3-20 Problems resolved in XCP 2050 (continued)
SPARC M10-
RTI No. 1 4 4S
RTIF2- x x x
130528-001
RTIF2- x x x
130903-005
RTIF2- x x x
131023-005
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2240 ･ March 2015
142
Description
You cannot use the PCI hot plug (PHP)
function to add a Quad Gigabit Ethernet
card (SE1X7GQ2F) to a PCI Express slot
of a PCI expansion unit.
In the XSCF e-mail notification function,
the following characters cannot be
included in the local part or the domain
part of the reply mail address which is
sent by the setsmtp(8) command.
"!" "#" "$" "%" "&" "'" "*" "+" "/"
"=" "?" "^" "_" "`" "{" "|" "}" "~"
If [Physical] bar is selected on the XSCF
Web menu, PCI (excluding the link card)
may appear to be abnormal ( ).
Workaround
This has been modified with XCP 2050
and SRU11.1.6.4.0.
If XCP and SRU are not applied, you
must stop the logical domain to which
you want to add the PCI card before
adding it.
[Precautions]
To resolve this problem when you have
saved the configuration information of
the logical domain and are operating the
system with a configuration other than
factory-default, you must reconstruct the
logical domain configuration after
update of the XCP firmware. For details,
see "Reconstructing the logical domain
(RTIF2-130528-001)."
Use reply mail addresses which do not
include the characters shown by the
Description.
There is no effective workaround.
Even if PCI (excluding the link card) is
indicated as being abnormal ( ), ignore
it.