Fujitsu M10 Product Notes page 188

Table 3-25 Problems resolved in Oracle Solaris 11.2 (continued)
SPARC M10-
Bug 1 4 4S
17709858 x
17777004 x
18055846 x x
Fujitsu M10/SPARC M10 Systems Product Notes for XCP Version 2240 ･ March 2015
174
Description
If the system board is deleted by dynamic
reconfiguration of the physical partition,
any of the following phenomena may
occur.
- The following message is output from
the logical domain, and Oracle Solaris
enters the panic state.
Fatal error has occurred in: PCIe
fabric.(0xxx)(0xxx)
- There is a hangup during the device
resume processing of a logical domain,
and deleteboard(8) ends with an error
due to a timeout.
If the logical domain has degraded
memory because of a memory failure,
when dynamic reconfiguration of the
physical partition is executed with the
deleteboard(8) command, Oracle Solaris
on the domain with the degraded
memory may enter the panic state.
When adding a PCI Expansion Unit by
PCI hot plugging (PHP), Oracle Solaris
may panic by producing the following
message.
panic[cpuX]/thread=XXXXXXXXXX: Fatal
error has occured in: PCIe fabric.(0xX)
(0xXX)
Workaround
This has been modified with SRU11.1.15.
4.0.
This has been modified with SRU11.1.17.
5, and the patch 150817-02 for Oracle
Solaris 10.
Before executing dynamic reconfiguration
of the physical partition, check whether
memory degradation has occurred from
the control domain. If memory
degradation has occurred, delete the
associated memory area in advance.
[How to check]
Execute "ldm list-devices -a -S memory".
If the resulting STATUS column displays
"fail", the memory area has been
degraded by SIZE from PA (physical
address) displayed on the same line.
[How to delete a memory area]
Execute "ldm remove-memory <total
value of above SIZEs> <domain name>".
It has been modified with Oracle Solaris
11.2 and the Oracle Solaris 10 patch
150400-18.