Powering On The System - Huawei SmartLogger2000 User Manual

SmartLogger2000
User Manual
No.
9

5.2 Powering On the System

Prerequisites
You have performed 5.1 Checking Before Power-On.


Context
For a smart array controller, the SmartLogger is installed before delivery, and the power cable
is connected.
Procedure
Step 1 Insert the output terminal of the power adapter into the 12V IN port of the SmartLogger.
Step 2 Insert the power cable into the power adapter.
Step 3 Insert the power cable plug into an AC socket.
If the SmartLogger is installed outside a smart array controller, place the power adapter on the
top of the SmartLogger and secure the power adapter using cable ties, as shown in Figure 5-1.
(2016-06-20)
Check Item
There is no unnecessary adhesive tape or cable tie on
cables.
1. When powering on the system, use the power adapter delivered with the product. The
rated input of the power adapter is 100–240 V AC, 50 Hz or 60 Hz. If adapters of other
models are used, the equipment may be damaged.
Select an AC socket that matches the power adapter.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 System Operation
Check Result
□ Compliant □
Incompliant
70