SmartLogger2000
User Manual
4.10 Connecting an Ethernet Network Cable
4.11 Connecting Optical Fibers
4.1 Connection Description
Port Description
For the bottom view of the SmartLogger and port description, see
Appearance.
Device Connection Description
Figure 4-1 shows the recommended method for connecting the SmartLogger to multiple
devices through the COM ports. For details, see 4.3 Connecting the RS485 signal SPD–4.8
Connecting a PID Module.
Figure 4-1 Connecting the SmartLogger to multiple devices through the COM ports
4.2 Connecting the PE Cable
The SmartLogger and SPD are separately connected to the ground bar for grounding
protection through a PE cable.
4.2.1 Connecting the PE Cable for the SmartLogger
Prerequisites
The ground cable and OT terminals are available.
(2016-06-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Connecting Cables
Bottom of the Shell
in 2.2
37