Specifications - Huawei SmartLogger2000 User Manual

SmartLogger2000
User Manual
Figure 2-9 Fiber+RS485/PLC
The X1 terminal block (general power input and AC output) and X2 terminal block (RS485
communications port) are in the upper part on the rear of the smart array controller.
Table 2-4 lists the components required for the fiber+RS485/PLC networking mode in the
scenario with a smart array controller.
Table 2-4 Components required
Component
PID module (optional)
PID inductor (working
with the PID module)
SmartLogger
RS485 signal SPD
ATB
(2016-06-20)
Recommended Model or

Specifications

PID01
EIFI50ohm
SmartLogger2000
SPM01A
CT-GZF2PJ-8 or
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Overview
Type Quantity
Installed before 1 PCS
delivery
Installed before 1 PCS
delivery
Installed before 1 PCS
delivery
Installed before 3 PCS
delivery
Optional; can be 1 PCS
16