Exporting All Files - Huawei SmartLogger2000 User Manual

SmartLogger2000
User Manual
Step 4 The SmartLogger automatically executes all commands specified in the boot script file. View
the LED indicator to determine the operating status.



Table 6-1 Indicator status
Indicator (Silk Screen)
ALM
----End

6.1.2 Exporting All Files

Context
USB flash drives of SanDisk, Netac, and Kingston are recommended. Other brands may be
incompatible.
Procedure
Step 1 Insert the USB flash drive into the USB port at the bottom of the SmartLogger.
(2016-06-20)
Verify that the USB flash drive contains a boot script file; otherwise, the SmartLogger
cannot execute the operations.
If SmartLoggers have the same APP login password, the boot script file generated by one
SmartLogger can be used in other SmartLoggers.
The initial APP login password of the SmartLogger is 00000a. Change it upon the first
login.
If the SmartLogger needs to be replaced, you can export the files before the replacement and then

import the files into the new SmartLogger to ensure data integrity.
After exporting all files, you can view information about the SmartLogger and devices connected to

the SmartLogger.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Status
Off
Blinking green at long
intervals (on for 1s and then
off for 1s)
Steady green
Blinking green at short
intervals (on for 0.125s and
then off for 0.125s)
6 User Interface
Meaning
No local maintenance is
underway.
Local maintenance is in
progress.
Local maintenance
succeeds.
Local maintenance fails.
73