Ipv6 Multicast Routing And Forwarding Configuration Commands (Available Only On The Hp 3600 V2 Ei); Display Multicast Ipv6 Boundary - HP 3600 v2 Series Command Reference Manual

IPv6 multicast routing and forwarding
configuration commands (available only on the
HP 3600 v2 EI)
The term "router" in this document refers to both routers and Layer 3 switches.
The term "interface" in the IPv6 multicast routing and forwarding features collectively refers to Layer 3
interfaces, including VLAN interfaces and Layer 3 Ethernet interfaces. You can set an Ethernet port as a
Layer 3 interface by using the port link-mode route command (see Layer 2—LAN Switching
Configuration Guide).

display multicast ipv6 boundary

Syntax
display multicast ipv6 boundary { group [ ipv6-group-address [ prefix-length ] ] | scope [ scope-id ] }
[ interface interface-type interface-number ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
group: Displays the IPv6 multicast boundary information for the specified group.
ipv6-group-address: Specifies an IPv6 multicast group address, in the range of FFxy::/16, where x and
y represent any hexadecimal number from 0 through F.
prefix-length: Specifies the prefix length of an IPv6 multicast group address, in the range of 8 to 128. The
default is 128.
scope: Displays the IPv6 multicast group boundary information in the admin-scope zone.
scope-id: Specifies the ID of an admin-scope zone in the range of 3 to 15, which is identified by the
scope field in the IPv6 multicast group address.
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
298