match: Displays PIM routing entries, where the outgoing interface list includes only the specified
interface.
mode mode-type: Specifies a PIM mode, where mode-type can have the following values:
dm: Specifies PIM-DM.
•
sm: Specifies PIM-SM.
•
ssm: Specifies PIM-SSM.
•
flags flag-value: Displays PIM routing entries that contains the specified flags. The values of flag-value
and their meanings are as follows:
2msdp: Specifies PIM routing entries to be contained in the next SA message to notify an MSDP
•
peer.
act: Specifies PIM routing entries that have been used for routing data.
•
•
bidir: Specifies PIM routing entries created by BIDIR-PIM.
del: Specifies PIM routing entries scheduled to be deleted.
•
exprune: Specifies PIM routing entries that contain outgoing interfaces pruned by other multicast
•
routing protocols.
ext: Specifies PIM routing entries that contain outgoing interfaces provided by other multicast
•
routing protocols.
loc: Specifies PIM routing entries on the devices that directly connect to the same subnet as the
•
multicast source.
•
msdp: Specifies PIM routing entries obtained from MSDP SA messages.
niif: Specifies PIM routing entries that contain unknown incoming interfaces.
•
nonbr: Specifies PIM routing entries with PIM neighbor searching failure.
•
rpt: Specifies PIM routing entries on RPT branches where (S, G) prunes have been sent to the RP.
•
rq: Specifies PIM routing entries of the receiving side of the switch-MDT switchover.
•
spt: Specifies PIM routing entries on the SPT.
•
sq: Specifies PIM routing entries of the originator side of switch-MDT switchover.
•
swt: Specifies PIM routing entries in the process of RPT-to-SPT switchover.
•
•
wc: Specifies wildcard routing entries.
fsm: Displays the information of the state machine.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display pim routing-table to display PIM routing table information.
If neither all-instance nor vpn-instance is specified, this command displays information about PIM routing
tables in the public network.
Related commands: display multicast routing-table.
140