Register-Suppression-Timeout (Ipv6 Pim View); Register-Whole-Checksum (Ipv6 Pim View) - HP 3600 v2 Series Command Reference Manual

[Sysname-pim6] register-policy 3000

register-suppression-timeout (IPv6 PIM view)

Syntax
register-suppression-timeout interval
undo register-suppression-timeout
View
IPv6 PIM view
Default level
2: System level
Parameters
interval: Register suppression time in seconds, in the range of 1 to 65535.
Description
Use register-suppression-timeout to configure the register suppression time.
Use undo register-suppression-timeout to restore the default.
By default, the register suppression time is 60 seconds.
Related commands: probe-interval and register-policy.
Examples
# Set the register suppression time to 70 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] register-suppression-timeout 70

register-whole-checksum (IPv6 PIM view)

Syntax
register-whole-checksum
undo register-whole-checksum
View
IPv6 PIM view
Default level
2: System level
Parameters
None
Description
Use register-whole-checksum to configure the router to calculate the checksum based on the entire
register message.
Use undo register-whole-checksum to restore the default.
397