Bestroute Med-Confederation (Ipv6 Mbgp Address Family View) - HP 3600 v2 Series Command Reference Manual

Description
Use bestroute compare-med to enable the comparison of the MED for paths from each AS.
Use undo bestroute compare-med to disable this comparison.
By default, the comparison of the MED for paths from each AS is disabled.
After you use the bestroute compare-med command, the balance command does not take effect.
Examples
# In IPv6 MBGP address family view, enable the comparison of MED for paths from each AS during best
route selection.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp]ipv6-family multicast
[Sysname-bgp-af-ipv6-mul] bestroute compare-med

bestroute med-confederation (IPv6 MBGP address family view)

Syntax
bestroute med-confederation
undo bestroute med-confederation
View
IPv6 MBGP address family view
Default level
2: System level
Parameters
None
Description
Use bestroute med-confederation to enable the comparison of the MED for paths from confederation
peers during best route selection.
Use undo bestroute med-confederation to disable the comparison.
Such comparison is disabled by default.
When you use this command used, the system compares MED values only for paths from peers within the
confederation. Paths from external ASs are advertised throughout the confederation without MED
comparison.
Examples
# In IPv6 MBGP address family view, enable the comparison of the MED for paths from peers within the
confederation.
<Sysname> system-view
[Sysname]bgp 100
[Sysname-bgp]ipv6-family multicast
[Sysname-bgp-af-ipv6-mul]bestroute med-confederation
409