Display Bgp Multicast Routing-Table Peer - HP 3600 v2 Series Command Reference Manual

*d 77.0.0.0
Table 53 Command output
Field
From
Flaps
Duration
Reuse
For more information about the output, see

display bgp multicast routing-table peer

Syntax
display bgp multicast routing-table peer ip-address { advertised-routes | received-routes }
[ network-address [ mask | mask-length ] | statistic ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
2: Monitor level
Parameters
ip-address: Specifies the IP address of an IPv4 MBGP peer.
advertised-routes: Displays routing information advertised to the specified peer.
received-routes: Displays routing information received from the specified peer.
network-address: Specifies the IP address of the destination network.
mask: Specifies the mask of the destination network, in dotted decimal notation.
mask-length: Specifies the mask length, in the range of 0 to 32.
statistic: Displays route statistics.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp multicast routing-table peer to display IPv4 MBGP routing information advertised to or
received from the specified IPv4 MBGP peer.
Related commands: display bgp multicast peer.
12.1.1.1 5
Description
Source IP address of the route
Number of routing flaps
Route flap duration
Reuse time of the route
Table
228
00:34:02 00:27:08
50.
100?