Filter-Policy Import (Mbgp Address Family View) - HP 3600 v2 Series Command Reference Manual

isis process-id: Filters outgoing routes redistributed from an ISIS process. The process ID is in the range of
1 to 65535.
ospf process-id: Filters outgoing routes redistributed from the OSPF process. The process ID is in the
range of 1 to 65535.
rip process-id: Filters outgoing routes redistributed from a RIP process. The process ID is in the range of
1 to 65535.
static: Filters static routes.
Description
Use filter-policy export to configure the filtering of outgoing routes.
Use undo filter-policy export to remove the filtering.
By default, the filtering is not configured.
If no routing protocol is specified, all redistributed routes are filtered.
Examples
# In IPv4 MBGP address family view, reference ACL 2000 to filter all outgoing routes.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family multicast
[Sysname-bgp-af-mul] filter-policy 2000 export

filter-policy import (MBGP address family view)

Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } import
undo filter-policy import
View
IPv4 MBGP address family view
Default level
2: System level
Parameters
acl-number: Specifies the number of an ACL used to filter incoming routing information, in the range of
2000 to 3999.
ip-prefix-name: Specifies the name of an IP prefix list used to filter incoming routing information, a string
of 1 to 19 characters.
Description
Use filter-policy import to configure the filtering of incoming routing information.
Use undo filter-policy import to disable the filtering.
By default, incoming routing information is not filtered.
Examples
# In IPv4 MBGP address family view, reference ACL 2000 to filter incoming routing information.
<Sysname> system-view
231