Reflector Cluster-Id (Ipv6 Mbgp Address Family View); Refresh Bgp Ipv6 Multicast - HP 3600 v2 Series Command Reference Manual

[Sysname-bgp-af-ipv6-mul] reflect between-clients

reflector cluster-id (IPv6 MBGP address family view)

Syntax
reflector cluster-id cluster-id
undo reflector cluster-id
View
IPv6 MBGP address family view
Default level
2: System level
Parameters
cluster-id: Cluster ID of the route reflector, an integer from 1 to 4294967295 (the system translates it into
an IPv4 address) or an IPv4 address.
Description
Use reflector cluster-id to configure the cluster ID of the route reflector.
Use undo reflector cluster-id to remove the configured cluster ID.
By default, each route reflector uses its router ID as the cluster ID.
The router ID of the route reflector is the ID of the cluster. You can configure multiple route reflectors to
improve network stability. If a cluster has multiple route reflectors, you must use the reflector cluster-id
command to specify the same cluster ID for these route reflectors to avoid routing loops.
Related commands: peer reflect-client and reflect between-clients.
Examples
# Set 50 as the cluster ID for the route reflector, which is one of multiple route reflectors in the cluster.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family multicast
[Sysname-bgp-af-ipv6-mul] reflector cluster-id 50

refresh bgp ipv6 multicast

Syntax
refresh bgp ipv6 multicast { ipv6-address | all | external | group ipv6-group-name | internal } { export
| import }
View
User view
Default level
1: Monitor level
Parameters
ipv6-address: Soft-resets the connection to the specified IPv6 MBGP peer.
453